Compared with straight line wire drawing machine, wet wire drawing machine has two notable characteristics. First, in the drawing process, there are varying degrees of relative sliding between the drawing wire and the spool (except finished spool). Second, when the wet wire drawing machine is in operation, wire, spool and wire drawing die are immersed in or be sprayed by cooling lubricating fluid.

Wet wire drawing machine has a broad market for its compact structure, small footprint and high drawing-intensive as well as no torsion in its running time. It is well suited for high speed drawing for good conditions of cooling and lubricating of drawing wires.

While in the drawing process, the relative sliding of drawing wire and the surface of spool consumes much power and abrasive wear of spool surface. Owing to the structure restriction of this wire drawing machine, it is more suitable for drawing wires of smaller diameters.

Wet wire drawing machine is available for drawing mild steel, carbon steel, stainless steel, copper, aluminum and alloys.

Sever types of wet wire drawing machines are provided and each of them has its own features. You can select the right one according to your particular conditions.

25 Dies wet wire drawing machine

Turnover type wet wire drawing machine

High-speed wet wire drawing machine

25 Dies wet wire drawing machine

Main technical parameters:

Inlet diameter: Φ 0.9-2.0mm

Inlet strength: 1350MPa

Outlet diameter: Φ 0.15-0.41mm

drawing passes: 25; average unit pressure: 13%

Max drawing speed: 25m / s

Motor power: tank - 37KW AC inverter motor and spool - 5.5KW

Cone pulley: monolithic assembly, surface coating - tungsten carbide , HRC58-62

Transmission Type: synchronous belt

Application
Available for mild, medium and high carbon steel.

Turnover type wet wire drawing machine

Applied in drawing rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc.

Technical parameters:

Item	LT21/275	LT23/280		LT25/230
Drawing drafts	21drafts	23drafts		25drafts
Max.inlet diameter	Φ1.80mm	Φ1.50mm		Φ1.50mm
Min.outlet diameter	Φ0.25mm	Φ0.10mm		Φ0.10mm
Drawing speed	20m/s	20m/s		20m/s
Motor power	22KW	18.5-30KW		18.5-30KW
Inlet wire tensile strength			≤1250Mpa
Transmission mode			Timing belt, AC frequency inverter control speed
Capstan production chart			Supersonic spray with WC, service life: 22000 hours
Cooling system			Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing.
Tensile strength system			Consist with tight and loose pulley, tensile cylinder is adjustable.
Arrange wire device			Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire.
Steel wire linearity			Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable.
Take up mode			I-spooler take-up
Control mode			AC frequency invert + PLC + man-machine interface + constant, complete digital logic control
Drawing materials			Rope steel wire, steel rod, galvanized zinc iron wire, silicon slice saw wire, etc.

High-speed wet wire drawing machine

Characteristics:

Innovation design and rational manufacturing process insures no leak in 3 years.

Box type welding machine structure, safety and beauty, insure high speed drawing reliable and stable.

Complete digital logic control, man-machine communication, status display, information service, etc.

Tension spooling and meter precision make steel wire better linearity.

Special design and control, satisfied with all kinds of I-spooler take up wire.

Parameters:

Item	LT17/350	LT17/300		LT19/250	LT25/200
Drawing drafts	1 + 17drafts	1 + 17drafts		1 + 19drafts	25drafts
Max.inlet wire diameter	Φ3.5mm	Φ3.0mm		Φ2.2mm	Φ1.00mm
Min.outlet wire diameter	Φ0.8mm	Φ0.65mm		Φ0.3mm	Φ0.10mm
Drawing speed	10m/s	12m/s		16m/s	20m/s
Motor power	6-55KW	4-55KW		22-30KW	15-22KW
Inlet wire tensile strength			≤1250Mpa
Transmission mode			Timing belt and powerful narrow belt, AC frequency inverter control speed
Capstan production chart			Supersonic spray with WC, axiality＜0.025 using life 22000 hour.
Cooling system			Capstan submerged in lubrication and cooling, tractor is hollow, recyclable water cooling inside, be suitable to high speed drawing.
Tensile strength system			Consist with tight and loose pulley, tensile cylinder is adjustable, and assemble double color protect cover.
Arrange wire device			Ball screw, driven by frequency inverter motor or servo motor, realize precision lay wire and flat arrange wire.
Steel wire linearity			Design and assemble all kinds of straightener, coil diameter of finished wire is stable and adjustable, slove twisting problem.
Take up mode			I-spooler take up
Control mode			AC frequency invert + PLC + man machine interface + constant, complete digital logic control