Shaking type bag filter, dust collector

Located in Qingdao, Sandry Machinery Co., Ltd. is a professional manufacturer in casting molding machinery with 7 years.Our dust removal equipment are Shaking type baghouse filter and Cartridge filter.

Technical parameter

Type	Bag Qty	Filtering area(m2/)	Wind capacity treatmet(m3/h)	Dust resistance(pa)	Anti-blowing source of pressure(mpa)
DMC24	24	24	2000	800-1200	0.4-0.6
DMC36	36	36	3000
DMC48	48	48	4000
DMC60	60	60	5000

Structure

The shell of filter is welded with reinforced steel plates. Sealed structure guarantees that dust air will not escape from the cabinet.Filter element consists of filter cartridges and support frame.

Features:

DMC pulse bag filter, with discharging system changed and structure simplified, absorbs the advantages of original pulsate . It has a large capacity of air processing, easy operation, less maintenance, stable performance and good running reliability. When compared with mechanical vibration roof dust remover, it has low working noise, long service life of filter bag and no abrasion caused by mechanical movement

Operating Principle:

Dust air enters cleaning trunk from the bottom of dust remover. Coarse dust particles fall into the dust cellar by its gravity; fine dust particles are attached on the surface of the filter bag by various effects. Dust grows thicker as time goes by, resistance for dust remover rises, which decreases air volume to be processed. Dust attached on the surface of the filter bag has to be removed to keep the dust remover in an effective working state and make pressure loss remain within a certain range. In cleaning process, controller is required to give out orders to each electromagnetic pulse valve. In this condition, filter bag conducts sudden contraction-expansion-contraction in an instant. Pressure loss of the dust remover and dust air quantity remain almost unchanged during dust removing process, which is also an advanced feature of pulsate bag dust remover.