molding silicon rubber Applications:

molding silicon rubber with the hardness of 38-42 shore A, is specially suitable for large crafts mould making and duplication of poly resin crafts in pouring way, PU crafts, gypsum or plaster, unsaturated resin, lighting and candles crafts, plastic toy, stationery gifts crafts, large statue buddha, furniture decoration, cement, articficial stone, etc.

Mould making silicone rubber Advantages: light viscosity, pourable effort, good fluidity, easy-operation, good tension and high tear strength.

Description of molding silicon rubber:
Mould making silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.

Features of molding silicon rubber

(1)high tensile & tear strength
2) Low linear shrinkage
3)free Curing agent
4)brushing & pouring
(5) high duplication times

molding silicon rubber data sheet:

Model	Color	Mixing ratio (%)	Pot life (mins)	Demould time ( hrs)	Hardness ( A0 )	Tensile-strength (kgf/cm2)	Tear-strength (kgf/cm)	Viscosity (cps)	Shrinkage rate (%)	Elongation (%)
638#	white	100 : 3	30	5-10	38	≥ 38	≥ 28	34000-36000	≤0.3%	380%
630#	white	100 : 3	30	5-10	30	≥ 47	≥ 35	28000	≤0.3%	430%

Using molding silicon rubber advantages:

* Reusable
* Molds can be used over and over again.
* Does not shrink
* Has good abrasion resistance.
* Comes in a wide range of hardnesses and therefore gives long mold life.
* Can be poured, brushed or sprayed on to the original model.
* Is the most economical overall (compared to other mold rubbers).

Frequently asked questions of molding silicon rubber

Why the molding silicon rubber appear with weak tear strength?

When making silicone rubber mold, some customer add a lot of silicone oil to reduce the viscosity of silicone rubber. In fact, this has the opposite effect. The tension and tear strength will be reduced badly with the addition of silicone oil, which leading to the weak and flimsy condition of silicone rubber molds.

Any questions of molding silicon rubber, please feel free to contact Ford

TEL: 086-755-89212365

FAX: 086-755-89948030

MOBILE:086-18938867528

SKYPRE:

Website: www(dot)szrl(dot)net

E-MAIL:hyk(at)resinpul(dot)com