Feature
1. The grinding chamber is tear-circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity;
2. The bottom of grinding chamber is equipped with U-shape double grinding structure, further improving the capacity with evener grinding fineness.
3. Rotor passed accurate dynamic balan cing test, resulting in low equipment noise and smooth as well as stable running.
4. One machine for both coarse grinding and fine grinding is realized through adjusting the gap between hammer and screen.
5. New type S shape coupling directly connecting driving results in big offset travel and effectively avoid the heating of bearing;
6. Beater blade edge is vacuum-welded by special alloy steel, resulting in long service life;
7. It is widely used in various feed mills, oil plants, alcohol plants, citric acid plants, etc.

Model	Dia. of Rotor (mm)	Width Of Grinding Chamber (mm)	Speed of Rotor (rpm)	Power (kw)	Capacity (t/h)
SFSP112× 30C	1120	290	1480	55	8-12
SFSP112× 30C	1120	290	1480	75	10-14
SFSP112× 38C	1120	380	1480	90	13-17
SFSP112× 38C	1120	380	1480	110	16-20
SFSP112× 50C	1120	500	1480	132	20-24
SFSP112× 50C	1120	500	1480	160	24-28
SFSP112× 75C	1120	760	1480	200	28-33
SFSP112× 75C	1120	760	1480	220	33-38
SFSP112× 100C	1120	1000	1480	250	38-42
SFSP112× 100C	1120	1000	1480	300	46-52
Model	Dia. of Rotor (mm)	Width Of Grinding Chamber(mm)	Speed of Rotor (rpm)	Power (kw)	Capacity (t/h)
SFSP138× 30C	1380	290	1480	75	10-14
SFSP138× 30C	1380	290	1480	90	13-17
SFSP138× 38C	1380	380	1480	90	13-17
SFSP138× 38C	1380	380	1480	110	16-20
SFSP138× 50C	1380	500	1480	160	24-28
SFSP138× 50C	1380	500	1480	200	28-33
SFSP138× 75C	1380	760	1480	220	34-38
SFSP138× 75C	1380	760	1480	250	39-43
SFSP138× 100C	1380	1000	1480	280	44-48
SFSP138× 100C	1380	1000	1480	350	54-58
Note: The above indices are those when meeting the following conditions: raw material: corn, moisture content not higher than 14%, density no lower than 0.72t/m3, screen: hole diameter 3mm, hole-opening rate no less than 33%.